Products Description

Sandy Nitrile Coated Cut Resistant Gloves (8" / 9")

Brand: SATA | Models: SF0761F (8"), SF0762F (9") | Type: Sandy nitrile coated cut resistant gloves | Colour: Black

SF0761F/0762F are SATA sandy nitrile coated cut resistant gloves with a high?strength fiberglass covered polyester/cotton and spandex liner and nitrile foam brushed palm coating. They provide excellent cut resistance and dexterity, and are classified as Class F cut?resistant gloves. The reinforced tiger mouth (crotch) design improves durability, and the nitrile foam brushed coating maintains excellent grip in wet or slightly oily environments. The two models differ only in size and length (8", 225 mm and 9", 230 mm).

Key Features

Class F cut resistance – excellent cut protection

Class F cut-resistant gloves offer high-level protection against sharp edges, sheet metal and glass, suitable for demanding cutting-hazard tasks.

Excellent cut resistance and dexterity

Designed to combine high cut resistance with good finger dexterity for fine handling and assembly work.

Nitrile foam brushed coating – excellent grip in wet/slightly oily conditions

Foam brushed nitrile palm maintains strong, reliable grip on wet or slightly oily surfaces, reducing slip risks.

Good abrasion resistance and comfort

Coating and liner materials provide good abrasion resistance while maintaining comfort for extended wear.

Reinforced tiger cuffs for enhanced durability

Reinforced crotch area (between thumb and index finger) increases resistance to wear and tearing, extending glove service life.

Two sizes: 8" / 9"

SF0761F (8", 225 mm) and SF0762F (9", 230 mm) cover different hand sizes and protection length requirements.

Elasticized knit cuffs

Elasticized knit cuffs ensure a secure fit around the wrist and allow quick donning and doffing while preventing debris entry.

Applications

Metalworking, sheet metal handling and deburring with sharp edges and high cutting risk.
Mechanical assembly and component handling where high cut resistance and dexterity are required.
Warehousing & logistics for handling cartons with staples, metal parts or glass.
Automotive repair and maintenance involving sharp parts and slightly oily environments.
General industrial tasks in wet or slightly oily environments with cutting hazards.

Specifications

Item	SF0761F(8")	SF0762F(9")
Product No.	SF0761F	SF0762F
Product Name	Sandy Nitrile Coated Cut Resistant Gloves 8"	Sandy Nitrile Coated Cut Resistant Gloves 9"
Style	Palm dipping	Palm dipping
Lining materials	High-strength fiberglass covered polyester/cotton and spandex	High-strength fiberglass covered polyester/cotton and spandex
Coating materials	Frosted Nitrile	Frosted Nitrile
Cuff style	Elasticized knit cuffs	Elasticized knit cuffs
Colors	Black	Black
Dimensions	8	9
Length (mm)	225	230
Packaging	1 pair/pack, 72 pairs/box	1 pair/pack, 72 pairs/box

Cut Level Comparison (EN 388)

Cut Level	Cut Index	Protection Ability	Applications
Level A	≥ 1	Basic cut protection, scratch resistance.	Light industry, warehousing.
Level B	≥ 5	Medium-high cut protection, sharp edge resistance.	Sheet metal, glass installation, automotive parts
Level C	≥ 10	High cut protection.	Mold making, heavy sheet metal, glass deep processing, automotive stamping
Level D	≥ 15	Extreme cut protection.	Knife manufacturing, heavy steel processing, sharp metal scrap
Level E	≥ 20	Near-maximum protection.	Specialized aerospace, nuclear, ultra-high-risk environments
Level F (This Product)	≥ 30	Highest level, ultimate protection.	Extreme hazards, high-pressure tasks, ultra-sharp materials

Frequently Asked Questions

Q: What is the difference between SF0761F and SF0762F?

A: They share the same material and construction, differing only in size and length: SF0761F is 8" (225 mm), SF0762F is 9" (230 mm). Choose based on hand size and required protection length.

Q: What does "reinforced tiger cuffs" mean?

A: The crotch area between thumb and index finger (often called the tiger mouth) is reinforced to improve resistance to wear and tearing, making the gloves more durable in heavy?use areas.

Q: Can I use them in wet or slightly oily conditions?

A: Yes. The nitrile foam brushed palm is designed to maintain excellent grip in wet or slightly oily environments. For aggressive chemicals, verify compatibility with SDS and use dedicated chemical?resistant gloves if necessary.

Q: When should I choose 8" vs 9"?

A: 8" offers a closer fit and higher dexterity for smaller hands or fine tasks; 9" provides longer coverage for larger hands or when extra protection length is needed. Measure your hand circumference for best fit.