Products Description

FH0511 TPE Gas Mask Half Facepiece Body (Single Cartridge)

Brand: SATA | Product: TPE Gas Mask Half Facepiece Body | Standard: GB2890-2022

FH0511 is a TPE material half facepiece body with single cartridge design, requiring matching filter cartridges. The TPE material is lightweight and cost-effective, suitable for environments with harmful gases, vapors, or mixed dust and gas hazards.

Accessories Matching

Image	Part No.	Product Name	Protection Target
	FH0602	A1 Filter Cartridge (Single, Organic Vapors)	Organic Vapors Ex: Benzene & homologues, gasoline, acetone, carbon disulfide, ether, carbon tetrachloride, chloroform, cyclohexane, nitromethane, ethanol, etc.
	FH0603	K1 Filter Cartridge (Single, Ammonia & Organic Ammonia Derivatives)	Ammonia & Organic Ammonia Derivatives Ex: Ammonia, methylamine, etc.
	FH0604	E1 Filter Cartridge (Single, Acid Gases)	Acid Gases Ex: Sulfur dioxide, chlorine, hydrogen chloride, hydrogen bromide, etc.
	FH0605	A1E1 Filter Cartridge (Single, Acid Gases & Organic Vapors)	Organic & Acid Gases Organic vapors: Benzene & homologues, gasoline, acetone, ether, cyclohexane, nitromethane, ethanol, etc. Acid gases: Chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, etc.
	FH0607	Pre-filter (For use with single cartridge filter boxes)	Particulate matter
	FH0618	Filter Cover (For single cartridge filter boxes)	For securing FH0607 pre-filter to SATA FH06 series filter cartridges
	FH0606	Filter Holder (For FH0511, FH0601 half masks)	Connects with FH0601, FH0511 half masks; compatible with FH0609A series filters
	FH0609	KN95 Filter (For use with FH0606 holder)	Particulate matter
	FH0609L	KN95 Filter - Long Life Type (For use with FH0606 holder)	Long-life particulate matter
	FH0609A	KN95 Particulate Filter (For use with FH0606 holder)	Particulate matter
	FH0609C	KN95 Activated Carbon Particulate Filter (With activated carbon, for use with FH0606 holder)	Odor removal, particulate filtration

Key Features

Single Cartridge Design

Simple structure, lightweight, wide field of view, suitable for moderate hazard environments.

TPE Material

TPE material is lightweight and soft with good sealing, more cost-effective than silicone.

Reusable

Facepiece body is reusable, only filter cartridges need replacement, economical and eco-friendly.

Applications

Organic vapor environments: Painting, cleaning, chemical processing.
Acid gas environments: Electroplating, pickling.
Dust and gas mixed environments: Requiring both particulate and gas protection.

Specifications

Parameter	FH0511
Standard	GB2890-2022
Product Type	Half Facepiece Body
Material	TPE
Cartridge Interface	Single Interface

Frequently Asked Questions

Q: How to match facepiece body with filter cartridges?

A: FH0511 is a single-cartridge half facepiece body. Select appropriate filter cartridge types (Type A, Type B, etc.) based on the hazardous environment.

Q: How to choose between TPE and silicone materials?

A: TPE is lightweight and cost-effective for general use. Silicone is softer, more comfortable, and more aging-resistant for extended wear or high-comfort requirements.

Q: How often should filter cartridges be replaced?

A: Replace immediately when odors are detected, dizziness occurs, or breathing resistance increases significantly. Replacement interval depends on environmental concentration and usage time.

Q: Can this protect against all harmful gases?

A: No. Filter cartridges have specific protection targets. Type A cartridges are for organic vapors, Type B for acid gases, etc. Choose appropriate cartridge types based on specific hazards.

Q: How to clean and maintain the facepiece?

A: Clean with mild detergent and water, air dry naturally. Avoid strong acids, alkalis, or organic solvents. Store in a cool, dry place.

黑料福利网

Products

SATA FH0511 Reusable TPE Half Facepiece Respirator - Single Cartridge For Gas/Vapor/Dust Protection