5 Tons Double Cylinders Wheel Loader Construction Equipment Spade Vehicle 1. High Reliability Upgraded & enhanced front & back frames Optimized H-series bucket Enhanced front axle of the H-Series.
5 Ton Double Cylinder Wheel Loader LT955 for Construction
Short-wheelbase, double swing-arm design built for high lifting capacity, fast cycle times and agility in confined construction sites. Powered by a 162 kW Weichai supercharged diesel engine with 8–12% lower fuel consumption.
Rated Load: 5,000 kg · Bucket: 3 m³ wear-resistant
Engine: Weichai 162 kW · Max torque 745.3 N·m
Breakout Force: 145±5 kN · Gradeability: 28°
Short Wheelbase: 2,760 mm – tight turning radius for limited job sites
Standard: ZL50F · ISO9001 / CE certified
ISO9001 & CE Certified
12-Month / 2,000h Warranty
Global Shipping (FOB/CIF/CFR)
OEM / ODM Accepted
Engineered for heavy-duty construction with superior lifting and digging performance.
Double Swing Arms
Higher lifting capacity, greater digging force and better load stability than single-arm designs – ideal for heavy material handling.
Fuel-Saving Weichai Engine
162 kW supercharged diesel with strong torque backup; fuel consumption reduced by 8–12% versus comparable models.
Short Wheelbase Agility
2,760 mm wheelbase with 35° steering angle and small turning radius – excellent flexibility in confined spaces.
Reinforced Frame
Strengthened front & rear frame with optimized load distribution for high lifting capacity and operational stability.
Designed to ZL50 international standard. Custom configurations available.
| General Parameters | |
|---|---|
| Model | LT955 |
| Rated Loading Capacity | 5,000 kg |
| Operating Weight | 16,500 kg |
| Bucket Capacity | 3.0 m³ |
| Bucket Width | 3,000 mm |
| Overall Dimension (L×W×H) | 7,600 × 3,000 × 3,350 mm |
| Wheelbase | 2,760 mm (short) |
| Tread Width | 2,250 mm |
| Performance | |
|---|---|
| Max. Dumping Height | 3,180 mm |
| Dumping Reach | 1,250 mm |
| Max. Breakout Force | 145 ± 5 kN |
| Max. Climbing Gradient | 28° |
| Turning Angle | 35° ± 1 |
| Lifting Time | ≤ 6.8 s |
| Hydraulic Cycle Time (3-item) | ≤ 12.55 s |
| Tire Specification | 23.5-25 |
| Engine & Travel Speeds | |||
|---|---|---|---|
| Engine Brand | Weichai (supercharged diesel) | Rated Power | 162 kW |
| Max. Torque | 745.3 N·m | Fuel Saving | 8–12% |
| Forward Gear I | 11.5 km/h | Forward Gear II | 38 km/h |
| Reverse Gear I | 16 km/h | Transmission | Planet-type, hydraulic torque converter |
Built for durability, efficiency and operator comfort on tough construction sites.
Double Swing-Arm Working Device
Two swing arms deliver higher lifting capacity and greater digging force than single-arm structures.
Unobscured cab view – operator can clearly see the bucket edge and load.
3 m³ enlarged bucket with trapezoidal wear-resistant steel main blade.
Thickened bottom blade reduces insertion resistance and extends service life.
Weichai Supercharged Diesel Engine
162 kW rated power with strong torque backup for heavy loads and steep grades.
Excellent cold-start performance for harsh environments.
Optimized transmission ratio ensures high output torque and strong traction.
8–12% lower fuel consumption reduces total operating cost.
Reinforced Frame & Short Wheelbase
Strengthened front and rear frame with reasonable load distribution.
Large steering angle (35°) and small turning radius for tight-site agility.
Optimized for harbors, construction sites, gravel pits and mines.
High lifting capacity and stability under full load.
Comfortable Cabin & Easy Operation
Spacious cabin with broad view to reduce operator fatigue.
Adjustable independent panel and ergonomic seat.
Joystick control and optional hydraulic quick hitch for fast attachment changes.
Optional radio, heater and air conditioning.
Which configuration suits your job site?
| Feature | LT955 (Double Cylinder) | Single Cylinder Loader |
|---|---|---|
| Swing Arm Structure | Double swing arms | Single swing arm |
| Lifting Capacity | Higher | Moderate |
| Digging Force | Greater | Good |
| Load Stability | Excellent under heavy load | Good |
| Maintenance Cost | Moderate | Lower (fewer parts) |
| Best For | Heavy construction, mining, ports | General loading, light material |
| Wheelbase | 2,760 mm (short, agile) | Varies |
Application Scenarios
Versatile performance across demanding job sites.
User Evaluation
Hassan Al-Rashid
Port Operations, UAE
Pavel Novak
Construction Contractor, Czech Republic
Daniel Osei
Mining Services, Ghana
Q:1.What is the difference between single and double cylinder wheel loader?
A:A double-cylinder (double swing-arm) loader provides higher lifting capacity, greater digging force and better stability under heavy loads, while a single-cylinder loader offers simpler structure and lower maintenance cost. The LT955 uses double swing arms for demanding construction work.
Q:2.What is the rated load of the LT955 wheel loader?
A:The rated loading capacity is 5,000 kg (5 tons) with a 3 m³ standard bucket. Bucket capacities from 2.7 to 4.5 m³ are available as options.
Q:3.What engine does the LT955 use?
A:A Weichai supercharged diesel engine delivering 162 kW rated power and 745.3 N·m maximum torque, with 8–12% lower fuel consumption than comparable models.
Q:4.What is the warranty and delivery time?
A:12 months or 2,000 working hours, whichever comes first. Delivery in 15–30 working days after deposit. We support FOB, CIF, CFR terms from Xiamen or Qingdao port.
Q:5.Can attachments be customized?
A:Yes. Quick hitch, pallet fork, wood fork, log grapple, snow blade and enlarged bucket are available. Custom attachments can be designed on request.
Q:6.Do you accept OEM / ODM orders?
A:Yes. We can print your brand, customize paint color, dashboard language and configuration. MOQ is 1 unit.
Hot Tags: 5 tons double cylinders wheel loader construction equipment spade vehicle, China, Chinese, factory, new
← Brand New 5 Tons Front End Single Cylinder Wheel Loader Zl50
No Information →
