5 Tons Front End Wheel Loader With 3 Cbm Bucket

5 Tons Front End Wheel Loader with 3 Cbm Bucket

5-ton front end wheel loader with 3 m³ bucket.

A heavy-duty front-discharge loader built around a 162 kW Weichai turbocharged diesel engine. The 3 m³ wear-resistant bucket, reinforced articulated frame and short wheelbase deliver fast cycle times, high breakout force and 8–12% lower fuel burn - engineered for ports, quarries, construction sites and mines.

CE & ISO Certified

12-Month Warranty

Global Shipping

OEM/ODM

5,000 kg

Rated Load

3 m³

Bucket Capacity

162 kW

Weichai Power

145 kN

Breakout Force

More Payload. Less Fuel. Longer Life.

Four engineering advantages that directly lower your cost per ton and keep the machine working.

3 m³ Bucket

Enlarged trapezoidal bucket with wear-resistant steel main blade and thickened bottom edge - low insertion resistance, high fill factor, longer service life.

Reinforced Frame

Optimized front & rear frame load distribution delivers higher lifting capacity and structural stability under continuous heavy-duty cycles.

-12% Fuel Burn

Weichai turbocharged intercooled engine plus dual-pump converging hydraulic technology cuts fuel consumption 8–12% versus conventional loaders.

Quick Attach

Wooden forks, pallet forks, grabs and snow blades can be quickly changed - one machine, multiple jobsites, maximum utilization.

103

The 3 m³ Bucket That Pays for Itself

Every detail of the bucket is engineered for faster cycles and lower wear cost.

Trapezoidal Wear-Resistant Main Blade

Optimized blade geometry reduces insertion resistance into compacted material, improving fill factor and reducing fuel per ton.

Thickened Bottom Edge

High-strength wear plate on the bucket floor extends service life in abrasive aggregate and ore applications.

Double Swing Arms

Symmetrical twin-arm design delivers balanced lifting force, unobstructed cab visibility and higher digging force.

Quick-Change Attachment Interface

Swap to wooden forks, pallet forks or grapple in minutes - one chassis, many applications.

104

LT955 Full Specifications

Complete parameters for engineering evaluation and procurement comparison.

Performance & Engine

Model	LT955 (ZL50 Series)
Rated Load Capacity	5,000 kg
Operating Weight	16,500 kg
Bucket Capacity	3.0 m³
Bucket Width	3,000 mm
Engine Model	Weichai WD10G220E23
Rated Power	162 kW @ 2,000 rpm
Max. Torque	745.3 N·m
Max. Breakout Force	145 ± 5 kN
Max. Climbing Gradient	28°

Dimensions & Transmission

Overall Dimension (L×W×H)	7,600 × 3,000 × 3,350 mm
Wheelbase	2,760 mm
Tread Width	2,250 mm
Dumping Height	3,180 mm
Dumping Reach	1,250 mm
Steering Angle	35 ± 1°
Lifting Time	≤ 6.8 s
Total Cycle Time (3 items)	≤ 12.55 s
Tire Specification	23.5-25
Travel Speed (Fwd I / II)	0–11.5 / 0–38 km/h

? Parameters may vary by configuration. Custom bucket capacity (2.5–4.5 m³) and attachments available on request.

111

Built on Proven Systems

Each critical system is engineered for durability, efficiency and fast service.

Powertrain
Weichai turbocharged intercooled diesel - strong power reserve and reliable cold-start.

162 kW, 745 N·m torque
Optimized transmission ratio, high traction
Planet-type gearbox, 2F + 1R

Hydraulics
Dual-pump converging technology for faster cycle times and energy savings.

Lifting time ≤ 6.8 s
Total cycle ≤ 12.55 s
Joystick pilot control, low effort

Frame & Boom
Reinforced articulated frame with double swing arms and 3 m³ wear-resistant bucket.

Large steering angle (35°)
Small turning radius
Quick-change attachment ready

Operator Cab
Spacious cab with low-noise damping, unobstructed view and ergonomic controls.

Optional ROPS / FOPS
Tilt-adjustable steering
Flame-retardant interior

Operator Cab
Spacious cab with low-noise damping, unobstructed view and ergonomic controls.

Optional ROPS / FOPS
Tilt-adjustable steering
Flame-retardant interior

Serviceability
Designed for fast, accessible daily service to maximize uptime.

Openable engine hood
Centralized electrical box
Externally routed grease nipples

102

One Loader, Many Jobsites

Quick-change attachments expand the LT955 across material handling, forestry and industrial yards.

Standard Bucket 3 m³

Wooden Forks

Pallet Forks

Grapple / Grab

Snow Blade

Slab Carrier

Light-Material Bucket

Quick Coupler

Where the LT955 Excels

From harbor docks to hard-rock quarries - one machine, multiple roles.

Construction Sites
Earthmoving, stockpile loading, material handling

Quarries & Gravel Pits
High breakout force for aggregate & crushed rock

Ports & Harbors
Short wheelbase for tight dock maneuvering

Mines
Durable frame for ore and overburden handling

Agriculture & Forestry
Quick-change forks, grabs & log handlers

Industrial Yards
Scrap, slag, bulk material handling

LT955 vs. Sibling Models

Compare the LT955 with adjacent models to choose the right configuration.

Parameter	LT955 ★	LT956	LT958	LT968
Rated Load (kg)	5,000	5,000	5,000	6,000
Operating Weight (kg)	16,500	16,800	17,400	19,500
Engine Power (kW)	162	162	162	175
Bucket Capacity (m³)	3.0	3.0	3.0	4.0
Dumping Height (mm)	3,180	3,200	3,400	3,750
Dimension L×W×H (mm)	7,600×3,000×3,350	7,600×3,000×3,380	7,970×3,000×3,540	8,250×3,210×3,640
Wheelbase (mm)	2,760	2,870	2,820	3,200
Tire	23.5-25	23.5-25	23.5-25	26.5-25
Best For	Compact sites, low fuel	General duty	Higher dump reach	Heavier loads

105

Trusted by Operators Worldwide

Real feedback from LT955 owners across regions and industries.

"The 3 m³ bucket fills cleanly in our gravel pit and the cycle time is fast. Fuel consumption is clearly lower than the previous Chinese loader we ran. Spare parts arrive within a week."

Ahmed M.

Quarry Manager, Egypt

"Short wheelbase is perfect for our harbor operations. The Weichai engine starts reliably in cold mornings and the quick-change forks let us switch from bucket to log handling in minutes."

Sergey K.

Logistics Director, Russia

"Good value for the price. The reinforced frame handles heavy aggregate daily without issue. We customized the bucket to 3.5 m³ for lighter material - OEM support was smooth."

José R.

Construction Co. Owner, Brazil

Certified to International Standards

Every LT955 is produced under ISO quality systems and certified for global markets.

★ CERT

European Conformity

★ CERT

ISO 9001

Quality Management

★ CERT

EPA

Emission Compliance

★ CERT

ROPS/FOPS

Cab Safety

★ CERT

TUV

3rd-Party Verified

Frequently Asked Questions

Quick answers to the most common questions from international buyers.

Q: What is the warranty period?

A: Standard warranty is 12 months or 2,000 working hours, whichever comes first, covering major components including engine, transmission, hydraulic pump and axle. Extended warranty options available.

Q: What is the MOQ and lead time?

A: MOQ is 1 unit. Standard lead time is 20–35 days for stock configurations and 35–50 days for customized builds, depending on attachments and bucket specification.

Q: Can I customize the bucket or attachments?

A: Yes. Bucket capacity from 2.5 to 4.5 m³, plus wooden forks, pallet forks, marble slab carriers, grapples, snow blades and quick couplers. Engine and transmission options also available.

Q: What payment terms and shipping methods are supported?

A: Payment: T/T (30% deposit, 70% before shipment) or L/C at sight. Shipping: Ro-Ro, bulk vessel or container (CKD/SKD packing). FOB Xiamen or CIF/CFR to your destination port.

Q: Do you provide after-sales service and spare parts?

A: Yes. A full spare parts list ships with each machine, and we maintain overseas agents in multiple regions for local service. Online technical support within 24 hours; engineers can be dispatched overseas.

Q: What certifications does the LT955 carry?

A: Produced under ISO 9001 quality systems with CE certification. Optional ROPS/FOPS cab and EPA-compliant engine configurations available for regulated markets.

Hot Tags: 5 tons front end wheel loader with 3 cbm bucket, China, Chinese, factory, new

← High Configuration Liteng Brand 5 Ton Front End Wheel Loader

5 Ton Wheel Loader Features Nice Performance →