New designed 6t compact engineering wheel loader LT968
175 kW raw power. 4 m³ wear-resistant bucket. 3.75 m dumping height. Engineered for mining, quarrying and heavy construction - with factory-direct pricing and lifetime parts support.
175 kW
Engine Power
6,000 kg
Rated Load
4 m³
Bucket Capacity
≤6.8s
Lift Time
CE / ISO
Certified
Every hour of downtime eats your profit. Every underpowered machine costs you contracts. Here's what buyers tell us they fear most - and how LT968 solves it.
"My old loader breaks down every month."
Cheap components and weak frames fail under heavy cycle loads, causing costly delays.
? LT968 Solution:Reinforced front & rear frame with higher torsion resistance + overload capacity, built for 20,000+ hour service life.
Old-generation engines burn diesel inefficiently during full-load bucket cycles.
? LT968 Solution:Optimized 175 kW powertrain with matched hydraulics delivers up to 15% lower fuel consumption per ton moved.
Abrasive rock and ore destroy thin-steel buckets, forcing expensive replacements.
? LT968 Solution:4 m³ wear-resistant, impact-resistant bucket with hardened cutting edge - dramatically reduced lifecycle cost.
Low dump height means double handling and slower loading cycles.
? LT968 Solution:3,750 mm max dumping height meets virtually all truck and crusher discharge requirements.
Poor visibility and cramped cabs slow production and raise accident risk.
? LT968 Solution:Spacious panoramic cab with 360° clear sightlines and ergonomic control layout.
Waiting weeks for a seal kit means a machine sitting idle and revenue lost.
? LT968 Solution:Global spare-parts dispatch within 72 hours + 24/7 English technical hotline + remote diagnostics.
6 Reasons Contractors Choose the LT968
175 kW Powerhouse Engine
Delivers 1,000 N·m peak torque and 175 kN breakout force to load dense ore, wet clay and blasted rock without bogging down - even on 28° grades.
4 m³ Wear-Resistant Bucket
Hardened steel construction with reinforced cutting edge resists abrasion and impact, slashing your cost-per-ton over the machine's lifetime.
Long Wheelbase + Articulated Frame
3,200 mm wheelbase and 35° articulation deliver superior traction, stability on slopes, and a tight 6.5 m turning radius for confined sites.
Panoramic Operator Cab
360° visibility, low-noise insulation and ergonomic joystick control reduce operator fatigue across 10+ hour shifts - boosting daily output.
≤6.8 s Full Lift Cycle
High-flow hydraulics with automatic lift control complete the full dump cycle in under 12.55 s - moving more material per hour, per litre of fuel.
72-Hour Global Parts Dispatch
Centralized lubrication points, ground-level daily checks and globally stocked wear parts keep your fleet running - backed by lifetime technical support.
| Item | Unit | LT968 |
|---|---|---|
| Engine power | kW | 175 |
| Rated loading capacity | kg | 6,000 |
| Bucket capacity | m³ | 4 |
| Bucket width | mm | 3,210 |
| Operating weight | kg | 19,500 |
| Overall dimension (L×W×H) | mm | 8,250 × 3,210 × 3,640 |
| Wheelbase | mm | 3,200 |
| Tread width | mm | 2,470 |
| Dumping height | mm | 3,750 |
| Dumping reach | mm | 1,300 |
| Turning angle | ° | 35 ± 1 |
| Max. climbing gradient | ° | 28 |
| Max. breakout force | kN | 175 ± 5 |
| Max. torque | N·m | 1,000 |
| Lifting time | s | ≤ 6.8 |
| Hydraulic cylinder time | s | ≤ 12.55 |
| Tire specification | - | 26.5-25 |
| Travel speed - Forward I | km/h | 11.5 |
| Travel speed - Forward II | km/h | 38 |
| Travel speed - Reverse I | km/h | 16 |
* Custom configurations (engine brand, bucket type, cabin options) available - contact us for a tailored build.
Proven Across the Toughest Jobsites
Mining & Quarrying
Continuous loading of blasted rock and ore with 4 m³ bucket - high breakout force handles the densest material.
Heavy Construction
Earthmoving, backfilling and material transfer on large infrastructure projects with 38 km/h travel speed between zones.
Ports & Bulk Handling
3.75 m dump height loads high-sided trucks, hoppers and containers in a single pass - no double handling.
Aggregate & Cement Plants
Feeds crushers and mixers around the clock with ≤6.8 s lift cycles and reinforced components designed for continuous duty.
Optional Configurations to Match Your Jobsite
Air-Conditioned Cab
Joystick Control (Pilot)
Automatic Weighing System
Rear-View Camera
Auto-Centralized Lubrication
Auto-Cooling System
Tire Chains
Quick Coupler / Quick Hitch
Extended Dump Height
Enlarged Bucket
Cummins Engine Option
Heated Cab (Cold Climate)
Frequently Asked Questions
01.What's the delivery lead time?
02.What warranty is included?
03.Can I get spare parts after the warranty period?
04.Do you provide operator training and manuals?
05.What payment terms and incoterms do you accept?
06.Is the LT968 suitable for high-altitude or cold-climate operation?
Hot Tags: new designed 6t compact engineering wheel loader lt968, China, Chinese, factory, new
← Brand New High Dumping ZL60 Wheel Pay Loader From Top Factory
6 Tons Payloader Machine With Competitive Price From Factory Directly →
