LT968 6 Ton Wheel Loader – 175KW Heavy-Duty Front End Shovel Loader
Built for mining sites, ports and heavy construction. The LT968 delivers a 4m³ bucket capacity, 6-ton rated load and a 3.75m dump height - engineered to move more material per hour while cutting your fuel and maintenance costs.
Weichai Engine
Rated Load
Bucket Capacity
Dump Height
Every hour of downtime and every extra litre of diesel eats into your profit. The LT968 was engineered around the four most common complaints we hear from fleet owners.
High fuel burn eating your margin
The WP10G240E341 turbocharged engine is matched to a power-optimized hydraulic system, delivering 175KW output with low fuel consumption and low noise - more tonnes moved per litre of diesel.
Weak breakout force in dense material
A maximum breakout force of 175kN and max torque of 1,000N·m let the LT968 bite into compacted gravel, ore and wet clay without stalling or wheel spin.
Structures failing under overload
Reinforced front and rear frames plus a long 3,200mm wheelbase raise overload capacity and torsion resistance - the machine stays stable even at 28° climbing gradient.
Slow cycles killing your hourly output
Lifting time ≤6.8s and hydraulic cylinder time ≤12.55s shorten each loading cycle, while 38km/h forward speed (Gear II) shuttles between stockpiles fast.
Feature → Advantage → Benefit → Proof. Each point below is backed by a verifiable component or a measurable spec.
Euro III compliant WP10G240E341 engine offers strong power reserve, low fuel consumption and nationwide parts availability - proven in tens of thousands of units.
3,210mm-wide bucket uses hardened wear plates and impact-resistant cutting edge - dramatically lower cost-per-tonne when loading rock, ore and aggregate.
Advanced, high-reliability transmission with 35°±1° articulation angle for tight-site maneuverability and smooth gear changes under full load.
Wide glass area gives the operator a clear view of the bucket and dump target; ergonomic joystick and A/C option reduce fatigue on long shifts.
Loads most highway-standard dump trucks and hoppers from one side - fewer repositioning moves, faster truck cycle times.
Large 26.5-25 tires with 2,470mm tread width deliver superior traction and flotation on soft, muddy or rocky ground.
One Machine, Four Demanding Jobs
With 6-ton rated load, 175kN breakout force and 28° climbing ability, the LT968 is a flexible workhorse across heavy industries.
Mining & Quarry
Loading blasted ore and overburden into 30–40t dump trucks.
Building Construction
Earthmoving, backfilling and aggregate loading on large projects.
Ports & Terminals
Fast loading of coal, grain, sand and container bulk cargo.
Agriculture & Stockyard
Silage, fertilizer and bulk material handling with optional buckets.
Complete factory datasheet. Configuration may be customized to your market requirements - contact us for exact options.
| Rated Loading Capacity | 6,000 kg |
|---|---|
| Operating Weight | 19,500 kg |
| Bucket Capacity | 4 m³ (bucket width 3,210 mm) |
| Rated Power | 175 KW / 2,200 r/min (Weichai WP10G240E341 turbocharged) |
| Max. Torque | 1,000 N·m |
| Max. Breakout Force | 175 ± 5 kN |
| Max. Dumping Height | 3,750 mm |
| Dumping Reach | 1,300 mm |
| Wheelbase / Tread Width | 3,200 mm / 2,470 mm |
| Turning Angle | 35° ± 1° |
| Max. Climbing Gradient | 28° |
| Lifting Time | ≤ 6.8 s |
| Hydraulic Cylinder Time | ≤ 12.55 s |
| Travel Speed (Forward I / II) | 11.5 km/h / 38 km/h |
| Travel Speed (Reverse I) | 16 km/h |
| Tire Specification | 26.5-25 |
| Overall Dimension (L×W×H) | 8,250 × 3,210 × 3,640 mm |
See how the LT968 stacks up in its class - bigger bucket, higher dump clearance, faster travel.
| Specification | LT955 (5T Class) | LT968 (6T Class) ★ | LT978 (7T Class) |
|---|---|---|---|
| Rated Load | 5,000 kg | 6,000 kg | 7,000 kg |
| Bucket Capacity | 3 m³ | 4 m³ | 5 m³ |
| Engine Power | 162 KW | 175 KW | 199 KW |
| Dump Height | 3,200 mm | 3,750 mm | 3,550 mm |
| Operating Weight | 16,500 kg | 19,500 kg | 23,000 kg |
| Best For | Light construction | Mining / heavy loading ★ | Large mining ops |
We ship LT968 loaders to 60+ countries with full export documentation.
Safe Export Packing
Shipped via flat rack container, RoRo vessel or bulk carrier; battery disconnected, mirrors removed and machine fully lashed for ocean transit.
Standard Spares Included
Every unit ships with filters, tool kit, operation manual and English wiring diagram - get to work the day it arrives.
Documents & Support
Complete CO, CIQ, Bill of Lading and customs paperwork provided. FOB / CIF / CFR terms available.
Buying heavy equipment is a long-term partnership - here is exactly what you get after payment.
12-Month / 2,000-Hour Warranty
Full machine warranty covering engine, transmission, axle and hydraulic system against manufacturing defects.
01
Lifetime Spare Parts Supply
Genuine parts stocked and shipped within 48 hours of confirmed order - no dead-end machines.
02
Remote Technical Guidance
Video call support with English-speaking engineers for installation, commissioning and troubleshooting.
03
Optional On-Site Engineer
For fleet orders, we can dispatch a service engineer to your site for commissioning and operator training.
04
Q: What is the price of the LT968 wheel loader?
A: Pricing depends on configuration (engine brand, cab options, bucket type) and your destination port. Submit the inquiry form below and our sales team will reply with an FOB or CIF quotation within 24 hours - factory-direct, no middleman markup.
Q: What is the minimum order quantity (MOQ)?
A: MOQ is 1 unit. We welcome trial orders so you can test the machine quality before placing fleet purchases.
Q: What is the delivery lead time?
A: Standard units are typically ready within 15–25 working days after deposit. Custom configurations may require 30 days. We will confirm the exact schedule at order confirmation.
Q: Which payment terms do you accept?
A: T/T (30% deposit, 70% balance before shipment) is standard. L/C at sight is available for qualified buyers. Other terms negotiable for large orders.
Q: Can the LT968 be customized for my market?
A: Yes. We can adapt the engine to local emission standards, add A/C cab, quick coupler, log grapple, side dump bucket, tire chains, rear camera and centralized lubrication system to match your working conditions.
Q: Do you provide spare parts after the sale?
A: Yes - lifetime parts supply. Filters, buckets, tires, hydraulic components and wear parts are stocked for fast dispatch with each shipment accompanied by English part diagrams.
Q: How is the machine shipped and what documents do I receive?
A: We ship via flat rack, RoRo or bulk carrier. You receive commercial invoice, packing list, CO, CIQ, Bill of Lading, and English operation & maintenance manual.
Hot Tags: shovel vehicle machine lt968 from factory, China, Chinese, factory, new
← Brand New Spade Vehicle Trucks Wheeled Loader LT968
Best Quality ZL 60 Wheel Loader With 6ton Loading Capacity For Sale →
