Home>Knowledge
1. Engine speed If the rotational speed of the engine is not adjusted correctly, the detection of the other performance of the excavator is unreliable with the standard value. Therefore, the engine...
The main reason for causing excavator heavy-duty flameout is: Since the working pump displacement is too large, the engine is automatically turned off due to heavy load. According to the hydraulic ...
First, the comprehensive analysis is performed according to the various aspects of the mastery, and it should be found from the most likely causes, and then look for a rare reason. The possibility ...
Note: The engine is low-speed operation before the engine oil pressure indicator is turned off. If the indicator light does not extinguish in 10 seconds, the engine should be stopped, and the reaso...
Fault phenomenon: The excavator homework has a black smoke, affecting the normal work of the excavator. Excavator Black Smoke Analysis: Under normal circumstances, the excavator is in the homework,...
Fault phenomenon: Excavator operations have high oil temperature, affecting the normal work of excavators. Excavator oil temperature high fault effect: 1 The oil temperature will cause the excavato...
With the rapid development of the social economy, the loader has promoted the improvement of the progress. The loader has a clutch. When the clutch is engaged, the torque of the engine is transmitt...
Fault phenomenon: Excavator operations occurred in the engine, if the pull is powerful, it may cause the excavator to turn off. (In general, the excavator is 50% to the upper speed, can be identifi...
Excavator engine is incorrectly started to cause excavator engine scrap failure, senior excavator maintenance engineers avoid excavator engine scrapping faults, and ten precautions when excavator e...
A alarm of a motor oil failure appears on an excavator dial of the job. It is used through the oil level, viscosity, and disassemble the oil filter inspection filter. How to make further details wh...
