Construction machinery repairing and maintenance knowledge for brand equipments Factory China - New - Liteng Machinery

23/Jun2021

Structure Principle Of Walking Circuit Of Kato Excavator

The pressure oil of the pump A1 drives the left travel motor through the spool 1 of the control valve (valve block A), and the pressure oil of the pump A2 drives the right travel motor through the ...

23/Jun2021

What To Pay Attention To When Installing The Loader Seat

The shape design of the loader seat must conform to the physiological functions of the human body, and strive to be beautiful on the premise of ensuring comfort. The seat must be safe and reliable,...

17/Jun2021

Analyze The Slewing Circuit Of The Kato Excavator

The slewing motor of the Kato excavator is driven by the spool 2 of the control valve (valve block A). The pressure of the oil circuit is adjusted by the overflow valve in the swing motor. When the...

17/Jun2021

The Structure Principle Of Kato Excavator Pump And Pump Drive

(1) Reduce the pressure of the fuel tank When disassembling the hydraulic pipeline or changing the hydraulic circuit, stop the engine and press the rubber plug on the air vent. When the pressure is...

17/Jun2021

The Structure Principle Of The Pilot Relief Valve Of The Pilot Hydraulic Syst...

The pilot relief valve of the Kato excavator is installed in the pilot gear, and the pilot gear pump is connected in series with the two main pumps. The hydraulic system continuously generates pres...

17/Jun2021

Kato Excavator Swing Motor Relief Valve

Two left and right swing relief valves are installed in the swing motor. 1. Pressure measurement method (1) Turn the start switch from the "ON" position to the "START" position,...

17/Jun2021

Check The Status Of The Kato Excavator APC100 System

Check the status of the Kato excavator APCI00 system. Before opening the APC100 system, you must make sure that the accelerator brake has been installed correctly. Otherwise, the engine speed is in...

17/Jun2021

Installation And Adjustment Of Accelerator Brake Of Kato Excavator

(1) Precautions when installing the accelerator brake ①The winding direction of the accelerator cable on the pulley should be changed according to the machine type, because there are two prescribed...

17/Jun2021

Kato Excavator Inspection And Replacement Of Engine Oil

Check procedure If the oil level gauge shows that the oil level is lower than the normal oil level, the oil should be full. Note that the oil filling should not exceed the "FULL" position...

17/Jun2021

The Principle Of Kato Excavator Bucket Circuit

The bucket cylinder of the Kato excavator is controlled by the valve core 3 of the control valve (valve block B). When the bucket spool is in neutral, the bucket cylinder stops. By moving the bucke...

First 171 172 173 174 175 176 177 Last174/374

黑料福利网

Knowledge

Structure Principle Of Walking Circuit Of Kato Excavator

What To Pay Attention To When Installing The Loader Seat

Analyze The Slewing Circuit Of The Kato Excavator

The Structure Principle Of Kato Excavator Pump And Pump Drive

The Structure Principle Of The Pilot Relief Valve Of The Pilot Hydraulic Syst...

Kato Excavator Swing Motor Relief Valve

Check The Status Of The Kato Excavator APC100 System

Installation And Adjustment Of Accelerator Brake Of Kato Excavator

Kato Excavator Inspection And Replacement Of Engine Oil

The Principle Of Kato Excavator Bucket Circuit