Home>Knowledge>Construction Machinery Knowledge
A clogged torque converter oil cooler and worn stator support bearings caused excessive heat generation and hydraulic oil degradation
Misaligned mast rails and a tight cylinder gland caused binding and accelerated chain wear, leading to jerky vertical movement
Worn swing motor piston shoes and a scored swash plate reduced volumetric efficiency, causing cavitation and sluggish rotation
A blocked brake hydraulic return line and faulty priority valve caused the transmission to disengage improperly, killing the engine
Corroded bulkhead connector pins and a weak starter motor caused high resistance, preventing the heavy-duty engine from cranking
A blocked shuttle valve in the pilot circuit prevented the parking brake from fully releasing, causing friction disc damage and delayed startup
A stuck priority valve spool and collapsed suction hose caused the steering system to starve for oil, resulting in uncontrolled machine movement and thermal failure
Worn inner rail shims and a restricted lift cylinder flow control valve caused instability and uneven lifting speed at high elevation
A leaking load-holding check valve and air ingress in the pilot line caused uncontrolled cylinder drift and spongy joystick response
A plugged transmission suction filter and worn reverse clutch piston rings caused cavitation and insufficient pressure for reverse engagement
