Product Description Specifications of Brand New 5 Ton Zl50gn 3m3 Bucket Front End Wheel Loader The LITENG LT958 5000kg single cylinder long wheelbase wheel loader is designed based on ZL 50F international standards, ensuring the energy saving, reliable and comfortable performance. This wheel...
Brand New ZL50GN 5 Ton Wheel Loader with 3 m³ Bucket
The industry-standard 5-ton front end loader - built on the proven cross-generation ZL50GN platform. 162 kW Weichai turbocharged engine, 3 m³ wear-resistant bucket, 3300 mm extended wheelbase for superior stability, and 167 kN breakout force. Engineered for quarries, mines, ports and heavy construction where uptime is non-negotiable.
? CE & ISO Certified
? 12-Month Warranty
? Global Parts Support
? OEM/ODM
Rated Load
Bucket
Weichai Power
Breakout Force
The Industry-Standard 5-Ton Platform
The ZL50GN is the most widely deployed 5-ton wheel loader platform in the world - meaning operators already know it, mechanics already service it, and spare parts are available everywhere. Lower training cost, faster maintenance, higher resale value.
The ZL50GN is the "safe choice" - proven, supported, and cost-effective over its full lifecycle.
Proven Platform
Cross-generation design refined over decades. The most field-tested 5-ton configuration - millions of operating hours logged worldwide.
01
Global Parts
Engine, axle, transmission and hydraulics follow industry-standard interfaces. Spare parts interchangeable with mainstream 5-ton class - no supply lock-in.
02
Long Wheelbase
3300 mm extended wheelbase delivers higher tipping load, greater stability and stronger traction in heavy-duty and soft-ground conditions.
03
Low Total Cost
Familiar design means lower operator training, faster servicing and stronger residual value - the lowest cost-per-ton in the 5-ton class.
04
3300 mm Long Wheelbase = More Stability, More Payload
The extended wheelbase is the single biggest structural upgrade of the ZL50GN over legacy 5-ton loaders.
Wheelbase: 3,300 mm
Operating Weight: 17,400 kg
Higher Tipping Load
Longer wheelbase shifts the center of gravity for greater load-bearing stability - lift more with confidence.
Stronger Traction
More weight on the drive axle means better grip in soft ground, sand and loose aggregate.
Smoother Ride
Reduced pitching motion over rough terrain lowers operator fatigue and structural stress.
Reinforced Rear Frame
Steel beam structure with optimized center distribution ensures high rigidity and long service life.
Complete parameters for engineering evaluation, procurement comparison and project planning.
| Model | ZL50GN |
| Rated Load Capacity | 5,000 kg |
| Operating Weight | 17,400 kg |
| Bucket Capacity | 3.0 m³ |
| Bucket Width | 3,000 mm |
| Engine Model | Weichai WD10G220E23 |
| Rated Power | 162 kW @ 2,000 rpm |
| Max. Torque | 745.3 N·m |
| Max. Breakout Force | 167 ± 5 kN |
| Max. Climbing Gradient | 28° |
| Overall Dimension (L×W×H) | 7,970 × 3,000 × 3,540 mm |
| Wheelbase | 3,200–3,300 mm |
| Tread Width | 2,280 mm |
| Dumping Height | 3,400 mm |
| Dumping Reach | 1,200 mm |
| Steering Angle | 35 ± 1° |
| Lifting Time | ≤ 6.8 s |
| Total Cycle Time (3 items) | ≤ 12.55 s |
| Tire Specification | 23.5-25 |
| Travel Speed (Fwd I / II) | 0–11.5 / 0–38 km/h |
? Parameters may vary by configuration. Custom bucket capacity (2.5–4.5 m³) and attachments available on request.
Every critical component is selected for durability, efficiency and ease of service.
Powertrain
Weichai turbocharged intercooled diesel - strong power reserve and reliable cold-start.
Z-Type Boom & Bucket
Single-cylinder Z-type connecting rod delivers great digging force and high efficiency.
Reinforced Frame
Steel beam rear frame with high rigidity ensures reasonable center distribution and stability.
New-Gen Cab
Streamlined new-generation cab with wide visibility, comfortable seating and quiet operation.
Axle & Tires
Heavy-duty drive axle engineered for high load and harsh terrain.
Easy Service
Top-flip hood and centralized pressure test points make daily maintenance fast and accessible.
The ZL50GN sits at the heart of Liteng's 5-ton class. Compare with the full range to match your payload requirement.
| Model | Engine (kW) | Rated Load (kg) | Bucket (m³) | Op. Weight (kg) | Dump Height (mm) | Dimension L×W×H (mm) | Tire |
|---|---|---|---|---|---|---|---|
| LT932 | 92 | 3,000 | 2.0 | 10,500 | 3,300 | 7,630×2,320×3,300 | 17.5-25 |
| LT955 | 162 | 5,000 | 3.0 | 16,500 | 3,200 | 7,600×3,000×3,350 | 23.5-25 |
| LT956 | 162 | 5,000 | 3.0 | 16,800 | 3,200 | 7,600×3,000×3,380 | 23.5-25 |
| ZL50GN ★ | 162 | 5,000 | 3.0 | 17,400 | 3,400 | 7,970×3,000×3,540 | 23.5-25 |
| LT968 | 175 | 6,000 | 4.0 | 19,500 | 3,750 | 8,250×3,210×3,640 | 26.5-25 |
| LT978 | 199 | 7,000 | 5.0 | 23,000 | 3,550 | 9,000×3,200×3,650 | 26.5-25 |
| LT988 | 199 | 10,000 | 7.0 | 28,000 | 3,350 | 9,200×3,200×3,650 | 26.5-25 |
★ ZL50GN = brand-new proven platform, extended wheelbase, highest stability in 5-ton class.
Where the ZL50GN Excels
From harbor docks to hard-rock quarries - the proven platform adapts to any jobsite.
Construction Sites
Earthmoving, stockpile loading, material handling
Quarries & Gravel Pits
167 kN breakout force for aggregate & rock
Ports & Logistics
Coal, grain and bulk cargo handling
Mines
Durable frame for ore and overburden
Agriculture & Forestry
Quick-change forks, grabs & log handlers
Industrial Yards
Scrap, slag, bulk material handling
Trusted by Operators Worldwide
Ahmed M.
Quarry Manager, Egypt
José R.
Construction Co. Owner, Brazil
Sergey K.
Logistics Director, Russia
Frequently Asked Questions
01.What does "ZL50GN" mean and why is it important?
02.Is the ZL50GN compatible with XCMG spare parts?
03.What is the warranty period?
04.What is the MOQ and lead time?
05.Can I customize the bucket or attachments?
06.What payment terms and shipping methods are supported?
Hot Tags: brand new 5 ton zl50gn 3m3 bucket front end wheel loader, China, Chinese, factory, new
