is an important supplement to the crawler excavator, which has the characteristics of maneuverability and flexibility. However, the wheel chassis also limits the specifications of wheel excavating, usually only in the range of 14~23 tons, which is more inconvenient to go on the road, and the smaller is the coincidence with the micro excavation and the backhoe. But there are always exceptions. Smaller is not a completely alternative relationship, although it has something to do with other types of equipment. Micro excavation and two busy businesses have their own advantages and disadvantages. Wheel digging is the same reason. Therefore, there will still be certain needs. Naturally, there will be manufacturers to produce.
At present, among the well-known manufacturers, only LITENG has 10~12 tons of . The LITENG model is LT100L here to give a brief introduction to the features of this machine.
As mentioned earlier, this is a tonnage between a common wheel and a micro dug. To get approval, a perfect compromise between compactness and productivity must be achieved. In fact, the design of LITENG LT100L does combine the characteristics of wheel and micro excavating.
In the part of the car, the LT100L is designed with a compact short tail, which can be constructed in a narrow space. At the same time, the moving arm can be revolving, which further increases the flexibility in the narrow space, which are the characteristics of the micro excavation. The moving arm adopts two stages, which increases the working range and avoids the long total length of the driving, which is the characteristic of the wheel digging. Of course, in terms of multi-function, the auxiliary hydraulic line and the hydraulic piping that control the quick change joints are all standard. After all, this level can't emphasize the efficiency of mining only.
In the car part, LT100L shows a stronger personality, different from the ordinary . First of all, the 4 wheel steering structure, of course there are 3 kinds of steering, two wheels, 4 wheels and crab. The maneuverability of this design is more flexible than the ordinary wheel digging, close to the level of the crawler excavator.
At the same time, in order to work stability, the front of the shovel and the rear legs are also essential. The outrigger is very characteristic. The most common one is the general wheel digging. The two machines use the vertical leg, which ensures the compact structure while ensuring the performance. In addition, the leg is also used to maintain the platform, and the personnel can stand on the maintenance.
This unusual machine integrates high performance, high productivity, high flexibility, high reliability and high comfort. It is also very compact, and its configuration is quite high. The engine meets the European emission requirements, and all the safety indicators are also in line with the European standard.
