Loader supplier Long Wheelbase Desigin Zl50 Zl60 5t6t7t8t5 Ton 6 Ton 7 Ton Front End Wheel Loader
Built for relentless productivity: 175 kW turbocharged engine, 6,000 kg rated load, 4 m³ reinforced bucket, and a long wheelbase design that delivers 28° gradeability and 35° articulation for the toughest quarry, mining and construction sites.
? 175 kW Engine
? 6 Ton Load
? 4 m³ Bucket
? 3.75 m Dump Height
? CE / ISO Certified
? 12-Month Warranty
If you've ever watched a jobsite stall because of fuel-hungry engines, weak breakout force, or a bucket that cracks after one season - you already know what a bad loader costs you. The ZL60 is engineered to eliminate exactly those problems.
Fuel Bills Eating Your Margin?
Most generic loaders guzzle diesel at idle and under light load. The ZL60's optimized power system auto-matches engine output to workload, cutting fuel consumption per ton moved by up to 18%.
→ Optimized power train = lower fuel cost per ton
Buckets Cracking Under Impact?
Cheap buckets deform and fail in high-impact quarries. The 4 m³ bucket on the LT968 is built from wear-resistant, impact-toughened plate steel - bucket replacement costs drop sharply.
→ Wear-resistant bucket = longer service life
Weak Breakout Force Slowing Cycles?
Undersized machines struggle to penetrate dense material. With 175±5 kN breakout force and 1,000 N·m torque, the ZL60 penetrates hard-packed aggregate in a single pass.
→ 175 kN breakout force = faster cycle times
Frame Twist & Instability on Rough Ground?
Reinforced front and rear frame with a 3,200 mm long wheelbase boosts torsion rigidity and traction - stable loading on slopes up to 28° without tipping the load.
→ Long wheelbase + reinforced frame = stability
Downtime From Hard-to-Service Parts?
Modular layout, swing-open hood and centralized lubrication points mean routine service in minutes, not hours - keeping your fleet running through peak season.
→ Easy maintenance = minimal downtime
Poor Operator Visibility = Safety Risk?
A spacious, climate-controlled cab with panoramic glass gives the driver a clear view of the bucket edge and work zone, reducing accidents and operator fatigue.
→ Spacious cab = safer, longer shifts
Verified factory data - the numbers that decide your productivity, not marketing fluff.
| Parameter | Value | Unit |
|---|---|---|
| Engine Power | 175 | kW |
| Rated Loading Capacity | 6,000 | kg |
| Bucket Capacity | 4.0 | m³ |
| Bucket Width | 3,210 | mm |
| Operating Weight | 19,500 | kg |
| Overall Dimension (L×W×H) | 8,250 × 3,210 × 3,640 | mm |
| Wheelbase | 3,200 | mm |
| Tread Width | 2,470 | mm |
| Dumping Height | 3,750 | mm |
| Dumping Reach | 1,300 | mm |
| Max. Breakout Force | 175 ± 5 | kN |
| Max. Torque | 1,000 | N·m |
| Turning Angle | 35 ± 1 | ° |
| Max. Climbing Gradient | 28 | ° |
| Lifting Time | ≤ 6.8 | s |
| Hydraulic Cylinder Time | ≤ 12.55 | s |
| Tire Specification | 26.5-25 | - |
| Travel Speed (Forward I) | 11.5 | km/h |
| Travel Speed (Forward II) | 38 | km/h |
| Travel Speed (Reverse I) | 16 | km/h |
Every component is engineered around one goal: moving more material, more reliably, at lower cost-per-ton.
Optimized Power System
Engine output is automatically matched to load conditions, delivering maximum torque at low RPM where most loading cycles actually happen.
Reinforced Frame
Front and rear frames are built with high-strength steel plates and reinforced stress points - higher overload capacity and torsion resistance on uneven terrain.
Wear-Resistant Bucket
The 4 m³ bucket uses impact-toughened wear plate on the cutting edge and side plates, slashing replacement frequency and downtime.
Long Wheelbase Stability
A 3,200 mm wheelbase increases traction and tip-over stability - load confidently on grades up to 28°.
Automatic Lifter
Auto-lift boom with programmable kick-out keeps cycle times consistent and reduces operator fatigue across long shifts.
Spacious Comfort Cab
Panoramic visibility, adjustable suspension seat, and climate control keep operators focused and productive shift after shift.
From compact 1-ton units to 10-ton heavy lifters, the same long-wheelbase platform scales to your material density and production target.
| Model | Engine (kW) | Load (kg) | Bucket (m³) | Dump Height (mm) | Op. Weight (kg) | Dimension (mm) | Tire |
|---|---|---|---|---|---|---|---|
| LT910 | 20 | 1,000 | 0.3 | 2,800 | 2,500 | 4700×1600×2600 | 1000-16 |
| LT914 | 40 | 1,400 | 0.7 | 3,200 | 3,650 | 5600×1860×2800 | 23.5-16B |
| LT918 | 65 | 1,800 | 0.9 | 3,500 | 5,300 | 6100×2050×2900 | 16/70-20 |
| LT920 | 88 | 2,000 | 1.0 | 2,800 | 5,800 | 6200×2260×3000 | 16/70-24 |
| LT925 | 92 | 2,500 | 1.2 | 3,500 | 8,200 | 6800×2400×3150 | 17.5-25 |
| LT932 | 92 | 3,000 | 2.0 | 3,300 | 10,500 | 7630×2320×3300 | 17.5-25 |
| LT955 | 162 | 5,000 | 3.0 | 3,200 | 16,500 | 7600×3000×3350 | 23.5-25 |
| LT956 | 162 | 5,000 | 3.0 | 3,200 | 16,800 | 7600×3000×3380 | 23.5-25 |
| LT958 | 162 | 5,000 | 3.0 | 3,400 | 17,400 | 7970×3000×3540 | 23.5-25 |
| LT968 ★ | 175 | 6,000 | 4.0 | 3,750 | 19,500 | 8250×3210×3640 | 26.5-25 |
| LT978 | 199 | 7,000 | 5.0 | 3,550 | 23,000 | 9000×3200×3650 | 26.5-25 |
| LT988 | 199 | 10,000 | 7.0 | 3,350 | 28,000 | 9200×3200×3650 | 26.5-25 |
★ Recommended model for this page - ZL60 / 6-ton class
Built for Every Heavy-Loading Jobsite
One platform, dozens of applications - the ZL60 adapts to wherever material needs to move.
Quarry & Aggregate Loading
Construction & Earthmoving
Agriculture & Bulk Material
Port & Logistics Handling
Get up close with the engineering that keeps the ZL60 running.
4 Steps to Get Your Loader on Site
From inquiry to delivery - a streamlined process that gets machines moving fast.
Send Your Requirements
Tell us tonnage, bucket size, attachments, and destination port.
Receive Quotation & Layout
Factory-direct price with spec sheet, lead time and shipping cost within 24 hours.
Confirm & Produce
Deposit triggers production; video inspection before shipment available.
Global Delivery
Worldwide shipping, on-site commissioning and spare-parts support.
Hot Tags: Loader Supplier Long Wheelbase Desigin Zl50 Zl60 5t6t7t8t5 Ton 6 Ton 7 Ton Front End Wheel Loader, China, Chinese, factory, new
← China Diesel Side Loader, 6 Ton Side Loader, Diesel Forklift Loader
Liteng Customize Construction Machinery Of 6 Ton LT968 Wheel Loader →
