6tons Construction Machinery Front Loader with EU3-Approved Engine
LT968 6-Ton Front Wheel Loader – Built to Move More, Burn Less
A heavy-duty construction front loader engineered for contractors who refuse to compromise. The LT968 combines a 175 kW EU3-approved diesel engine, a 4 m³ wear-resistant bucket and a long-wheelbase chassis to deliver 6,000 kg rated loading capacity with breakout force up to 175 kN - cycle after cycle, shift after shift.
Factory-direct
pricing
15–25 day
lead time
Global
spare parts support
CE / EU3
compliant
Every day on site, the wrong machine costs you money. Here's how the LT968 addresses the four most common complaints buyers raise before switching to our loaders.
Our answer: The electronically controlled EU3 engine optimizes combustion across the full RPM band, while the 500-hour extended oil change interval cuts both fuel and maintenance spend - reducing total cost of ownership by up to 15% versus Tier-2 units.
Our answer: A reinforced front and rear frame significantly improves overload capacity and torsional rigidity. Wear-resistant, impact-resistant bucket steel extends service life even when loading abrasive rock and ore.
Our answer: With a maximum dumping height of 3,750 mm and dumping reach of 1,300 mm, the LT968 clears standard dump trucks, tippers and hoppers in a single pass - no repositioning, no spilled material.
Our answer: Factory-direct spare parts dispatch, remote video diagnostics, multilingual manuals and optional on-site engineer support keep your fleet running - wherever you operate.
Every design decision on the LT968 traces back to one goal: more tons moved per hour, at lower cost per ton.
EU3-Approved 175 kW Engine
Delivers 1,000 N·m of maximum torque with electronic fuel control - the muscle to fill a 4 m³ bucket in dense material without lugging down.
4 m³ Wear-Resistant Bucket
Impact and abrasion-resistant bucket steel dramatically reduces replacement costs. 3,210 mm bucket width means full pass coverage on standard loading faces.
Long 3,200 mm Wheelbase
Improved traction and longitudinal stability when carrying full loads on ramps or uneven ground - climbs gradients up to 28° with confidence.
Rapid Hydraulic Response
Full lift in ≤ 6.8 s and complete hydraulic cycle in ≤ 12.55 s - shorten every working cycle and move more material per hour.
Spacious, Low-Fatigue Cab
Wide glazing provides a clear view of the bucket edge and surrounding site. Ergonomic seat and intuitive controls keep operators productive across long shifts.
35° Articulation Angle
Sharp turning angle plus a 38 km/h forward-II travel speed means fast repositioning between stockpiles - even on tight urban sites.
Verified factory data - no marketing fluff. Compare line by line against any machine you're currently evaluating.
| Item | Unit | LT968 |
|---|---|---|
| Engine Power | kW | 175 (EU3 / Stage III approved) |
| Rated Loading Capacity | kg | 6,000 |
| Bucket Capacity | m³ | 4 |
| Bucket Width | mm | 3,210 |
| Operating Weight | kg | 19,500 |
| Overall Dimension (L×W×H) | mm | 8,250 × 3,210 × 3,640 |
| Wheelbase | mm | 3,200 |
| Tread Width | mm | 2,470 |
| Dumping Height | mm | 3,750 |
| Dumping Reach | mm | 1,300 |
| Max. Breakout Force | kN | 175 ± 5 |
| Max. Torque | N·m | 1,000 |
| Turning Angle | ° | 35 ± 1 |
| Max. Climbing Gradient | ° | 28 |
| Lifting Time | s | ≤ 6.8 |
| Hydraulic Cylinder Time | s | ≤ 12.55 |
| Tire Specification | - | 26.5-25 |
| Travel Speed - Forward I | km/h | 11.5 |
| Travel Speed - Forward II | km/h | 38 |
| Travel Speed - Reverse I | km/h | 16 |
Need a custom configuration - high-lift arms, quick coupler, rock bucket, cold-start package or cab A/C upgrade? Tell us your working conditions and we'll tailor a proposal within 24 hours.
Where the LT968 Earns Its Keep
From municipal projects to mining haul roads, the LT968 is configured to handle the material and cycle demands of demanding worksites.
Construction Sites
Load trucks, backfill foundations and clear excavation spoil with 3.75 m dump height clearance over standard tippers.
Mining & Quarrying
175 kN breakout force handles dense ore, rock and compacted overburden with the 4 m³ wear-resistant bucket.
Agriculture & Bulk Handling
Grain, silage, fertilizer and feedstock loading with optional light-material buckets up to larger capacities.
Road & Municipal Works
38 km/h travel speed enables rapid repositioning across long road corridors and municipal depots.
User Evaluation
请替换当前内容 I was very impresed by the company service lore ipsum is simply free text used by copy typing. Neque simply free text porro est dolorem ipsum quia.
Sarah Albert
Contractor
I was very impresed by the company service lore ipsum is simply free text used by copy typing. Neque simply free text porro est dolorem ipsum quia.
Sarah Albert
Contractor
I was very impresed by the company service lore ipsum is simply free text used by copy typing. Neque simply free text porro est dolorem ipsum quia.
Sarah Albert
Contractor
I was very impresed by the company service lore ipsum is simply free text used by copy typing. Neque simply free text porro est dolorem ipsum quia.
Sarah Albert
Contractor
60+
Exporting Countries
15–25
Days Production Lead Time
24h
Technical Response Guarantee
12
Months Structural Warranty
The answers procurement teams and site managers ask us most before placing an order.
Q: What emission standard does the LT968 engine comply with?
A: The LT968 is powered by a 175 kW diesel engine certified to EU3 (Stage III) emission standards, ensuring legal operation across most international markets while maintaining a maximum torque output of 1,000 N·m for demanding loading cycles.
Q: What is the maximum loading capacity of the LT968?
A: The rated loading capacity is 6,000 kg (6 tons) with a 4 m³ bucket and breakout force of 175 ±5 kN - suitable for dense materials such as gravel, ore and compacted soil, not just light aggregates.
Q: Can the LT968 work in cold or hot climates?
A: Yes. The optimized cooling system supports reliable operation across a wide ambient range, and optional cold-start packages (glow plugs, battery upgrades, hydraulic oil heaters) are available for sub-zero jobsites.
Q: What after-sales support and spare parts do you provide?
A: We supply factory-original spare parts, remote video diagnostics, multilingual operation manuals and optional on-site engineer dispatch. Parts are shipped globally with full export documentation.
Q: What's the production and delivery lead time?
A: Standard lead time is 15–25 working days after deposit confirmation. We arrange containerized or Ro-Ro shipping to your nearest port and handle all export paperwork.
Q: Can I get a custom bucket or attachment package?
A: Absolutely. Quick couplers, high-lift arms, rock buckets, side-dump buckets, forks and snow blades can be configured to your specific application. Send us your material type and site conditions for a tailored proposal.
Hot Tags: 6tons construction machinery front loader with eu3-approved engine, China, Chinese, factory, new
← Very Popular Earth Moving Equipment Model LT968 Front End Wheel Loader
Machinery 6.0ton Loader Made In China Zl60 Wheel Loader CE Certificate →
