My major is starting up, that's our professional strength. My partner went home, he opened the machine that the site did not live, a site to the machine, the Daewoo pulled to dry, a long time haven't opened the Daewoo, it is really not used to, slowly have some feel, quickly take out my pixel unlike mobile phone, pixels do not spray well! The crayfish are numerous, and the crayfish do the trick. A lot of students who are studying or just starting their own work can refer to it. This post first describes the indoor leveling of small excavators. No matter in any condition, in any condition, we should find your reference first, which is the basic condition. As an indoor leveling, the reference material is easier to find, the wall is the best reference, and the bottom beam. If you take the brick as the reference material, it is the brick layer structure, several layers of bricks from the bottom up, and the brick seam for your point. How many centimeters, for the standard judgment, because bricklaying is basically flat, of course, this is only in the flat soil elevation above the bottom beam to do so. Today, this life is divided into horizontal elevation under the bottom beam, which is relatively easy to do. The reference is very good for the leveling. The requirements are almost all, the standard is not too high. Well, the picture below is explained.
You need to pay attention to this elevation
The focus begins, first along the bottom of the beam, from the left to the right, and from the right to the left, the soil on this side of the beam to Gaoping, this time must be very standard, because the flat surface, directly as a reference to you.
The small arm and the bucket should be vertical
The position of the bucket should be in a vertical position with the forearm and the bucket, a line, this angle is conducive to leveling, forearm and back swing should not exceed 45 degrees. If you are unskilled, start from this, the machine is flat, the arm and the small arm, the small arm and the bucket line, so little action, practice faster, and slowly even the bucket move together, finally can slowly expand the leveling of the angle, but also not too large, too big, too big that affect efficiency. Every time the leveling is 2/3 to the earth and 1/3 in the entire surface, you can clearly see the bucket teeth and the whole surface gently crossed. This is your standard point, that is, a shovel and a shovel. If you don't press a point, the hook is full of earth, and you have to sprinkle it again, not a waste of time. ? So if you want to do it once in a while, maybe you should say it's too fast to do that. You're wrong. You do more work at the same time. You can also reduce the throttle to the same amount of work as other people's throttles. That's a great way to save gas.
Pay attention to the thick soil
Too much soil must be cleaned up in time. Too thick soil can easily affect your judgement.
A flattening of the dumped soil
The soil is flattened directly to the back, do not do it deliberately, and do not heap too high, the machine is high, the vertical look down, will also affect your judgment, the height increases, the machine is near the top of the building, in the back of the soil, it is easy to meet the top.
The leveling of the soil on the side beam
When you go to the side of the beam, you should sweep away the soil on the beam, so that you can see the beam, your reference, and the other to prevent the machine from hooking to the beam, causing damage to the beam.
Sweep the soil of the side beam to the pit
Digging this small pit is to sweep the soil near the beam, because it is difficult to flatten the side of the beam.
Sum up: the basic requirement to do a good leveling job is the eye, before the leveling, we must find a good reference, if the eye is not good, not sure, get off the car and see, there is a little error in the car and under the car, it needs to practice, slowly mastering, the old machine hands on no problem, one said You know how to do it. The three main points to note are to find a good reference, get out of the car and have more practice.
