Abstract:
The new factory is located in Vitali F, Germany, with a total investment of 310000 euros and an investment of 130 million euros. It is sure that the factory will be built on a very solid foundation, as the sturdy soil stabilizer and the Hummer road roller have built a high - quality bearing base for it.
Construction information
The most important of the construction site is the civil engineer. The focus of their work is to build a flat and high bearing foundation for the production and logistics workshop, the office building of the 12000 and the road surface. In order to achieve this goal, the topography was thoroughly reformed and stabilized.
"The height difference of the ground surface is about 8 - 9 m. Leveling these ground needs to remove and fill about 400000 m of soil. " Heinrich Plein, a production engineer and interior engineering management team at Bian Ning, explains. To his delight, the field construction will make progress every day, closer to the established goal, because his goal is clear: "we are building a solid foundation for an advanced production plant to ensure that we produce better asphalt mixing stations. That's why the quality is regarded as the focus of work at the beginning of the construction - everything starts with the foundation.
High quality is reflected in every detail
Two sets of soil stabilizer and six Hummer rollers have played an important role in foundation construction. The team from EBS Bodenstabilisierungs Ltd., based on soil quality, uses a soil stabilizer to evenly mix the designed lime cement binder into the soil, stabilizing up to 12 layers and reaching up to 40 cm per layer.
The EBS operator, J u rgen Scharnbach, who has been engaged in soil stability and improvement for up to 35 years - still successful in this field, is very satisfied with Wittgen's equipment: "Wittgen soil stabilizer is outstanding in the market, especially in speed, life and operating side."
Once the binder is mixed, the general contractor Strabag Limited will arrange Hummer rollers to carry out all important compaction work. The initial pressure is carried out with multiple bumper rollers, two or three sets. Subsequently, two roller rollers are used for final compaction.
The construction effect shows everything: "the bearing capacity and compactness of the survey fully satisfy the requirements of the construction contract. Each floor is smooth and no crack - it's an example of construction. Eduard Weber, SBT building material inspector, from the road and concrete engineering laboratory quality assurance department.
Mature brand portfolio, successful completion of the task
Kristina Fischer and Siena Schneider, the site manager of Strabag limited, also praised the excellent work of these machines, because "so far, only severe frosts and heavy rains have blocked our construction plans. The construction of soil stabilization machines for the avagan and Hummer brands is perfect and reliable, so we have nothing to do." We need to worry, and that's what we expect. "
One-stop solution
It is very proud that the subsequent asphalt paving works of the new plant in Bian Ning Hu are also completed by the machines of the group. Therefore, the asphalt used in the new factory road, the parking lot and the storage area is only suitable for the production of one of the earliest Ningho bitumen mixing stations. These asphalt mixing stations were made in rzig for more than 30 years ago and were owned by Juchem. The bitumen produced is paving and compacted by using the technology of the technology group.
The kg soil stabilizer dumped 50-75 lime cement mixtures per square meter per square metre, and the total dumping site was about 23000 t.
After compaction of the soil by the Hummer bumper roller, the roller compactor is finally compacted.
"We are very satisfied with the excellent work of Wittgen soil stabilizer and Hummer road roller." Members of the field management team of Strabag Limited (field manager B. Eng. Kristina Fischer, FH master engineer Siena Schneider and master engineer Thorsten Ragge) commended.
The foundation of the car park area was built by interns of the intergroup on technology day.
All workshops and office buildings have been built. Internal decoration work is under way: electrical equipment, air conditioning and heating systems, clean water walls and components such as powder spraying equipment have been installed in the workshop.
