On May 24, 2022, the National Technical Committee for standardization of industrial vehicles (hereinafter referred to as "the Technical Committee for standardization of industrial vehicles") organized a discussion on the revised version (first draft) of jb/t11037-2010 technical conditions for 10 000kg ~ 45 000kg internal combustion balanced weight forklift trucks. The meeting was held in the form of video conference. The meeting was attended by 15 representatives from 13 units, including members of the standard drafting working group and the Secretariat of the industrial vehicle Standardization Committee.
The meeting was presided over by zhaochunhui, Secretary General of industrial vehicle Standardization Committee. After listening to the introduction of the standard drafting unit Hangcha Group Co., Ltd. on the preliminary work and main revision contents of the revision of jb/t 11037-2010 technical conditions for 10000kg ~ 450000kg internal combustion counterweight forklift truck, the participating experts discussed the first draft of the standard chapter by chapter. The meeting first discussed the name and scope of application of the standard. The participating experts agreed to change the name of the standard plan from "10 000kg ~ 45000kg counterweight forklift" to "10 000kg ~ 65000kg passenger driven counterweight forklift"; The rated voltage of the storage battery, the safety factor of the lifting chain for forklift, the natural variation of the inclination angle of the gantry (or fork), the operation of the forklift accelerator pedal, and the industrial test are mainly discussed. The experts gathered their wisdom and put forward many good opinions and suggestions on the first draft of the standard. The meeting also discussed the next work plan and successfully completed the scheduled tasks.
The passenger driven counterweight forklift truck is a product with large quantity and wide range of industrial vehicles. With the rapid development of China's logistics industry, the market demand for the passenger driven counterweight forklift truck with a tonnage of more than 10t is increasing. Especially with the upgrading of the national environmental protection emission policy and the improvement of binding requirements, more and more new energy large tonnage battery driven counterweight forklifts are being introduced to the market. With the development of technology, market demand and the preparation and revision of relevant standards for industrial vehicles, the original standards can no longer meet the needs of product status and technical development. The revision of the above industry standards has solved the problems of standard age aging and the lack of standard basis for large tonnage battery driven balance weight forklifts, expanded the range of rated lifting capacity, and realized the integration of safety requirements with international advanced standards. It is of great significance to further improve the product quality and technical level of large tonnage passenger driven balance weight forklifts, promote the high-quality development of the industrial vehicle industry, and standardize the market economic order, It is of great significance to enhance the international competitiveness of products and cooperate with the safety supervision of special equipment.
